Mine said 9 mapped fields and 3 unmapped and its supposed to be 12 map fields
top of page
MaxzPlace
Help Forum
Sorry you're stuck but there's almost always a pretty easy fix! Do NOT try to start all over again, eg. uninstall Max's Pitch Package, etc. That can make things worse.
​
Before you post make sure you check the Help FAQ for an instant solution first. Then, if you can't find it there, you can post your problem here and we'll get to it ASAP (within 24 hours), but be sure you:
​
-
post in the right category
-
INCLUDE AT LEAST ONE SCREENCAP IN YOUR POST TO SHOW THE PROBLEM!!!!!!!!
-
explain the problem clearly
bottom of page
Should I start Lab 1b from the beginning or continue where I left off?
I suspect you may have skipped the first 4 steps of Lab 1b which is where you are supposed to delete the Pitch object you made in Lab 1a so you don't get confused between that one and the new one that is installed as part of Max's Pitch Package. Now you must be trying to import into the old one from 1a instead of the new one from Max's Pitch Package.
Computers are very picky. It's important that you do each and every step in the instructions to avoid running into problems.
Now go to Setup > Object Manager and scroll down to find Pitch and you will see there are two of them, I think. One will have "Pitch__c" next to it. That is the one from 1a. You need to delete that one by clicking on the down-arrow at the far right side and clicking Delete and then Ok.
Then you should be able to choose the correct Pitch object when you're trying to import and there should be no mapping errors.
Let me know, ok?